Manhattan
Yorkville base at 517 E 77th St; usually on site within about two hours in business hours.
Manhattan coverageDuctless Mini-Split Installation NYC
Ductless mini-split installation in NYC by AC Repair NYC, a licensed contractor at 517 E 77th St, Manhattan. We size, install and commission single-zone and multi-zone systems for apartments, offices and small buildings across Manhattan, Brooklyn and Queens. Single-zone installs run $3,800 to $6,500. Call (212) 201-9201.
Do you install ductless mini-splits in NYC?
Yes. Ductless installation from single-head 9,000 BTU systems ($3,500 to $5,500) up to multi-zone 5-head systems ($12,000 to $22,000). We work with Mitsubishi, Fujitsu, Daikin and LG. Line-set routing through brownstone facades, co-op window through-walls, and landmark district installations. Free written estimate. Call (212) 201-9201.
Credentials
- Licensed HVAC contractor
- Fully insured crews
- EPA Section 608 certified
- NYC DOB registered
Certification and license records are available on request while our public verification page is in progress.
Fit
Where ductless works well in NYC buildings
- Pre-war apartments with no existing ductwork and limited window space.
- Brownstone floor-through units where a rear facade allows the outdoor unit.
- Offices splitting a single floor into two or three temperature zones.
- Basement or garden apartments where window units are impractical.
- Loft conversions with high ceilings and one long open plan.
- Small hotels and short-stay buildings retiring older PTAC fleets.
Process
How we scope an installation
Site visit
We measure rooms, check facade access, review electrical capacity and confirm building rules with the managing agent.
Load calculation
System size is based on room load, glazing and orientation — not a rule of thumb.
Written scope
Equipment, line-set path, mounting method, electrical work, permits and total price in writing before deposit.
Install and commissioning
Vacuum, pressure test, refrigerant charge and delta-T logged; you get the commissioning sheet with the invoice.
Pricing
Mini-split install price ranges
| Service | Price range |
|---|---|
| Single-zone install, standard line-set | $3,800 – $6,500 |
| Dual-zone install, two indoor heads | $7,500 – $12,500 |
| Multi-zone install, three to four heads | $11,000 – $18,000 |
| Cold-climate outdoor unit upcharge | $800 – $1,600 |
| Line-set concealment / architectural cover | $400 – $1,200 |
| First-year service and commissioning check | included |
Ranges reflect 2026 New York City market rates for a licensed, insured contractor. Access conditions (rooftop, scaffolding, elevator windows in doorman buildings) and parts availability move the final number, so we confirm the price in writing before any work starts. The diagnostic fee is credited toward the repair when you approve it the same visit.
Coverage
Where we do this work
Manhattan, Brooklyn and Queens. The Bronx and Staten Island are outside our service area.
Brooklyn
Williamsburg, Park Slope, DUMBO, Brooklyn Heights, Bushwick, Bay Ridge.
Brooklyn coverageQueens
Long Island City, Astoria, Sunnyside, Woodside, Forest Hills, Flushing, Jamaica.
Queens coverageFrequently asked questions
How much does a ductless mini-split installation cost in NYC?
A single-zone installation typically runs $3,800 to $6,500 depending on line-set length, electrical work and outdoor unit placement. Multi-zone systems with two to four indoor heads run $8,500 to $18,000. We issue a written scope after a site visit, not a phone quote.
How long does a mini-split install take?
A single-zone install on an accessible facade or courtyard is usually one working day. Multi-zone systems, co-op work with restricted hours or long line-set runs take two to three days. We give a firm window in the written scope.
Do you handle co-op and condo approvals?
Yes. We prepare the equipment cut sheets, insurance certificates and installer license documentation that managing agents ask for, and we schedule around building work-hour rules. Tell us the managing agent when you request the site visit.
Which mini-split brands do you install?
Mitsubishi Electric, Fujitsu, Daikin and LG most often. We are trained on the ductless brands we service most, and we tell you honestly which model line fits the room, not the highest margin option.
Can you install a cold-climate mini-split for winter heating?
Yes. Cold-climate hyper-heating systems are a common choice for NYC electrification retrofits. We size the outdoor unit against the design temperature, not just the summer load, so it heats reliably in a January cold snap.
Do you also service the systems you install?
Yes. Every install includes a first-year service check and we hold the equipment history so a fault three years later is diagnosed against the actual commissioning readings.
Keep reading
Related services
AC Installation
Window, ductless mini-split and central AC installation with load calculation.
AC installationCentral AC Repair
Split systems, air handlers and condensers in apartments and small buildings.
Central AC repairWall AC Repair
Through-the-wall sleeve and PTAC unit repair in pre-war apartments.
Wall AC repair
Related reading
Before you call — read this first
Ductless mini-split vs central AC
When ductless is the right call for a brownstone or pre-war apartment.
How to choose the best AC
Sizing, system type and installation constraints for NYC apartments.
Get service
Request a quote or call us directly
Tell us the building type, floor and how many rooms you want to cool or heat. We book a site visit and quote from measurements.
- Address
-
517 E 77th St
New York, NY 10075 - Phone
- (212) 201-9201
- info@acrepair.nyc
- Hours
-
Monday–Friday 8:00–18:00
Saturday 9:00–15:00
Sunday closed · emergency line answered 24/7 - Service area
- Manhattan, Brooklyn, Queens